Another RGB related issue
Printed From: Aurora
Category: Aurora Sequencer Software
Forum Name: Aurora 1.0
Forum Discription: This is the place to discuss (and report bugs) the 1.0 version of Aurora
URL: http://www.aurorashow.com/forum/forum_posts.asp?TID=968
Printed Date: 10 May 2024 at 6:11am
Software Version: Web Wiz Forums 9.06 - http://www.webwizforums.com
Topic: Another RGB related issue
Posted By: TheQueb
Subject: Another RGB related issue
Date Posted: 14 Dec 2009 at 10:59pm
 I'm not sure where to go with this one. I have 1 DCx16 in my setup and It's set as ID #9. Channels 1, 2 and 3 are setup as RGB for my MR16 color wash floods. Channel 4 is set as plain old white for some MR16s I use on some coro cut-outs. In the HW utility I can run any test I want there and all four channels work. When I run scheduler or sequencer the white spots (channel 4) dont ever come on. When I right click on channel 4 and look at the properties I see Network 1 (I only have the one network) ID 9 and channel 4. When I look at the properties for the RGB floods I see Network 1 ID 9 and channels 1, 2 and 3, just how I would imagine it SHOULD look... Any ideas why channels 1, 2 and 3 work but 4 dosen't? And only in the sequencer and scheduler?------------- 80 D-Light-ful Channels http://www.SoutheastTexasLights.com - Southeast Texas Lights http://www.frappr.com/dlight - D-Light Users |
Replies:
Posted By: bdkeen
Date Posted: 15 Dec 2009 at 8:16am
|
I'm using 4 RGB floods and 4 seperate channels as well on a DCx16.
In my case channels 1-3, 4-6, 7-9, 10-12 are set up as D-Light RGB (over ACx16 or DCx16)
and channels 13, 14, 15, 16 are setup as DCx16.
Been working fine here ------------- 
|
Posted By: TheQueb
Date Posted: 15 Dec 2009 at 8:39am
|
As a test I made another RGB (set of) channel(s) with 4, 5 and 6, 4 being my problem channel. When I put a command on that RGB set the white lights come on. Tried going back to JUST a single channel on DCx16 and it still doesn't work. ------------- 80 D-Light-ful Channels http://www.SoutheastTexasLights.com - Southeast Texas Lights http://www.frappr.com/dlight - D-Light Users |
Posted By: TheQueb
Date Posted: 15 Dec 2009 at 6:24pm
|
Another test. Started fresh with no controllers added. Added the channel 4 (white lights) and added a "on command" and ran the sequence. It worked. Added the 1, 2 and 3 RGB channels and they didnt work but the white did.
Started over and added the RGB channels first. worked. Added the white lights and they didn't work.
All still work fine in HW Utility.  ------------- 80 D-Light-ful Channels http://www.SoutheastTexasLights.com - Southeast Texas Lights http://www.frappr.com/dlight - D-Light Users |
Posted By: Jonathan
Date Posted: 15 Dec 2009 at 7:16pm
|
We'll look into this, but be patient if the response time is a little slow. Trust me, things are going at a rapid pace behind the scenes right now.
------------- ~Jonathan |
Posted By: TheQueb
Date Posted: 15 Dec 2009 at 7:21pm
|
No biggie, I'm just gonna plug my 110v floods in to light the cutouts... ------------- 80 D-Light-ful Channels http://www.SoutheastTexasLights.com - Southeast Texas Lights http://www.frappr.com/dlight - D-Light Users |
Posted By: LightsOnLogan
Date Posted: 15 Dec 2009 at 8:43pm
|
What firmware is your DCx16 using?
------------- http://www.aurorashow.com/"> 
|
Posted By: TheQueb
Date Posted: 15 Dec 2009 at 11:06pm
Looks like I may be behind on my DC board. I'm at 1.11  ------------- 80 D-Light-ful Channels http://www.SoutheastTexasLights.com - Southeast Texas Lights http://www.frappr.com/dlight - D-Light Users |
Posted By: Jonathan
Date Posted: 15 Dec 2009 at 11:52pm
|
v2.0 added a lot of fixes, including "enhanced effects". I've had effects prgrammed since last year that are finally getting used. (Random Shimmer ramp out looks great, BTW with a strobe light). Try v2.0 and see if that helps, but also make sure you are using the newest Firmware Updater (v2.2.2 as of this writing). While you're at it, download the newest HW Utility, v2.4.2 if you haven't already. ------------- ~Jonathan |
Posted By: TheQueb
Date Posted: 16 Dec 2009 at 12:08am
|
I got all the latest (except firmware for my DC board) at the beginning of this season, Early November but I'll check and make sure while I'm downloading the new firmware. Thanks for the help! ------------- 80 D-Light-ful Channels http://www.SoutheastTexasLights.com - Southeast Texas Lights http://www.frappr.com/dlight - D-Light Users |
Posted By: TheQueb
Date Posted: 16 Dec 2009 at 2:20pm
|
Ok I upgraded firmware, HW utility and firmware installer. Immediatley tried a sequence and it didnt work so I went to my default channels template sequence and deleted those channels and re-installed them one at a time and it worked on the template file. I went into each of my song sequences and imported the template and now everything is working fine. Thanks for the input on this one. Appreciate your time! ------------- 80 D-Light-ful Channels http://www.SoutheastTexasLights.com - Southeast Texas Lights http://www.frappr.com/dlight - D-Light Users |