DMX and D-Light output
Printed From: Aurora
Category: Aurora Sequencer Software
Forum Name: Aurora & DMX
Forum Discription: The place to discuss using DMX with Aurora
URL: http://www.aurorashow.com/forum/forum_posts.asp?TID=1422
Printed Date: 01 May 2025 at 6:44pm
Software Version: Web Wiz Forums 9.06 - http://www.webwizforums.com
Topic: DMX and D-Light output
Posted By: CapitalB666
Subject: DMX and D-Light output
Date Posted: 05 Oct 2012 at 7:01pm
|
Hi
Please can someone tell me can i have DMX and the original D-Light systems running together on one pc and if so how. I just cant work out how to do this DMX stuff. 
Thanks.........Rob |
Replies:
Posted By: deweycooter
Date Posted: 06 Oct 2012 at 12:20pm
|
You'll need two dongles - one will output DMX and the other D-Light. ------------- http://www.deweycooter.com/wiki/index.php/Aurora - Aurora Lights Wiki http://www.aurorashow.com/"> 
|
Posted By: CapitalB666
Date Posted: 06 Oct 2012 at 4:35pm
|
Thanks Dewey (Sir)
I have 2 dongles so OK there  but how does Aurora know what is what ? sorry i am probably not explaining myself very well.
Last year i had 112 d-light channels if i want to add dmx lights (RGB) etc how do i tell aurora ?? Sorry i am being so thick i am sure i am missing something. Rob |
Posted By: deweycooter
Date Posted: 08 Oct 2012 at 8:47am
|
I'm going on memory, but your DMX channels need to be on network 32. Set these channels up in the sequencer.
In the show player, you need to specify which dongle is your d-light network (probably network 1), and which is the DMX (network 32). There's a setup/config menu in the show player. Have both dongles connected when you start up the player, each dongle will have an ID (there may or may not be a sticker on the dongle itself). You'll have to play with it to determine which is which. ------------- http://www.deweycooter.com/wiki/index.php/Aurora - Aurora Lights Wiki http://www.aurorashow.com/">
|